WL2046超声波细铝丝压焊机 邦定机 键合机 引线键合机

1. 自动焊接第二点，且二轴（焊头、位移、）同步运行，因此与过去的U2000型相比，其焊线速度有较大提高，也因此大大降低了一焊颈部断线的可能性；
2. 位移方式为焊头位移方式，加上焊头减振机构，速度质量更理想。
3. 合理的加、减速，使焊头运行更趋平稳；
4. 性能优良的弧度系统，使弧度任意可调，一致性好；
5. 由于采用自动检测钢咀是否到位和数控调整一检、二检的高度，对一焊、二焊高度差较大的器件，也同样应对自如；
6. 调整方便，各种参数（超声功率、时间、焊接压力、瞄准点高度、弧度、跨度）均置于面板上用旋钮调节；
7. 特有的第一焊点、第二焊点压力分别设定系统，使一焊、二焊可焊性和稳定性增强。

该机型亦为焊头位移式机型，除没有80条线跨度（或30条线高度、跨度）记忆功能外，其余功能及性能与WL2100型相同。由于LED数码管、点阵板每条线的长度基本相同，因该机型特别适合其生产。同时价格比WL2100较为低廉。

 

1, Automatic bonding the second point, two axes (bonding head, displacement) moving simultaneously, higher speed compared to the U2000, and greatly reducing the possibility of broken line at the first bonding

2, Displacement mode is bonding head moving, and the suspension system make the speed faster

3, The reasonable acceleration and deceleration control make the bonding head move stable

4, The high radian system performance, adjustable radian and good consistency

5, Automatic detection of steel nozzle, if the nozzle is right installed, numerical control adjusting the height of first and second detection; meanwhile can be used on the device, which with great height difference between first and second bonding

6, Easy and simple to handle, all parameters (ultrasonic power, time, bond force，aiming point height, radian, span) can be setted with the bottom knobs on the panel.

7, Specific system: the respectively first and second bond force setting, and enhancing the stability and weld ability.

This type of machine is welding head displacement type, except the memory function of 80 lines span (or 30 lines height and span), it include all the functions as WL2100. Because the line length is close, the machine can be used at the production of LED digital tube and lattice board. Beside is the price cheaper as WL2100.