免费咨询热线:400-9611-220
您现在的位置:首页产品展示手动手动细铝丝压焊机 > WL2100细铝丝压焊机
  • 产品名称: WL2100细铝丝压焊机
  • 产品编号: WL2100

1. 自动焊接第二点,且二轴(焊头、位移、)同步运行,因此与过去的U2000型相比,其焊线速度有较大提高,也因此大大降低了一焊颈部断线的可能性;
2. 位移方式为焊头位移方式,加上焊头减振机构,速度质量更理想。
3. 合理的加、减速,使焊头运行更趋平稳;
4. 性能优良的弧度系统,使弧度任意可调,一致性好;
5. 由于采用自动检测钢咀是否到位和数控调整一检、二检的高度,对一焊、二焊高度差较大的器件,也同样应对自如;
6. 调整方便,各种参数(超声功率、时间、焊接压力、瞄准点高度、弧度、跨度)均置于面板上用旋钮调节;
7. 特有的第一焊点、第二焊点压力分别设定系统,使一焊、二焊可焊性和稳定性增强。
 
Primarily applied to digital tube, lattice board, and production of COB and low-medium power audion
1.It can automatically weld the second spot, and the two axes (welding head and displacement) operate synchronously. So, compared to the former U2000, its speed is advanced greatly, which reduces the probability that the neck of the first welding is break.
2.The way of displacement is welding head displacement.
3.Reasonable acceleration and deceleration make the operation more stable.
4.It has a memory of the displacement distance of 80 lines or the precise height, arc and displacement data of 30 lines. The welding line has a digital display and has the functions of rewelding and data modification which especially favors the processing of COB.
5.Excellent arc system makes the arc adjustable at will and has a good consistency.
6.It can used for the apparatus that have a great difference between the heights of the first and second welding very well due to the automatic inspection technique and the digital control function.
7.All the parameters (ultrasonic power, time, welding pressure, precise height, arc, span) can be adjusted conveniently by the knobs on panel.
8.The first welding spot pressure and the second welding spot pressure have respective systems which increase the weldability and stability.Except for applied to digital tube and lattice board, all of the characteristics above are quite suitable for the production of COB and low-medium power audion.
 

试用电源:220VAC±10%,50Hz、可靠接地
消耗功率:50W
适用铝线线径:25~50um(1-2mil)
超声波功率:0~5W连续可调
焊接时间:0~200ms
焊接压力:第一、第二焊点可分别设定,20~100g
最小焊接时间:0.28秒/线(跨度设为1mm时)
一焊至二焊最大自动跨度:不小于6mm
焊线跨度记忆数:1-80条
或瞄准高度+焊线跨度+弧度高度:1-30条
工作台移动范围: ¢15mm
视觉系统:体视显微镜
外形尺寸:600(长)×560(宽)×400(高)mm
重量:约26Kg
 
*Adaptable power:220VAC±10%,50Hz,reliable grounding
*Consume power:50W
*Adaptable aluminum wire size:25-50μm(1-2mil)
*Ultrasonic power:0~5W continuous adjustable
*Welding time: 0~200ms
*Welding pressure:the first and second welding point can be set respectively, 20~100g
*Min welding time:0.28s/line (when span is 1mm)
*The max automatic span of the first and second welding points:not less than 6mm
*Bonding wire span memory number:1-80pcs
*Or aiming height plus bonding wire span plus radian height:1-30pcs
*Work table moving range: Φ15mm
*Vision system: alternative stereo microscope and image monitor
*Exterior size: 600(L)×560(W)×400(H)mm
*Weight: About 26Kg
 

关键词:

下载附件: