免费咨询热线:400-9611-220
您现在的位置:首页产品展示辅机、耗料辅机 > 扩张机(4、6寸)
  • 产品名称: 扩张机(4、6寸)
  • 产品编号: 0017

一.机器用途
LED晶片密布在一张方型膜片上,由于排列紧密,在上刺晶相当困难,本机器就是通过对膜片进行扩张,使晶片分布稀疏,便于刺晶,并且本机器对膜片扩张程度可随意控制,操作方便,工作稳定可靠,效率高。

二.机器性能
外形美观,体积小,重量轻,噪声少,使用220V电压,因此,本机器占地少,使用方便,对操作工技术要求低,劳动强度低,并可用于家庭作业。

三.机器使用注意事项
1.温度设定应根据膜片性能及扩张程度。
2.为防止扩张时损坏扩张膜片,扩张程度不宜太大。
3.为防意外,机器电源插头接地。
4.气缸工作时,锁扣一定要压紧工件夹,以免损坏压模。
5.请不要随意拆装机器。手不要伸进机器台面板下的空腔,以防电击。其他详细看产品使用说明书。
 
一.Machine purpose
LED wafer is covered densely on a rectangular membrane piece with the close arrange, so it is rather rough to stick the wafer into the piece. In order for an ease stick the wafer, the wafer needs to be distributed sparsely by outspreading, the piece. The machine can control the extent of outspread, which makes job convenient and generate reliable and high-efficient output.
二.Machine performance
It is a fair, small-sized, and light machine, working with low noise and under 220 voltages. It requires less space and low level-skill, which catches many home busy workers.
三.Noticed
1.  The regulation of temperature should be relied on the performance of membrane and the temperature of outspread.
2.Norder to prevent membrane from damages when expanding, the expansion should be operated properly.
3. In order to guard against the accident, machine power source must connect the earth, while people are not allowed to stand behind the machine.
4. The lock catch must impact the workpiece closely when the cylinder is working, in case to prevent damage of press model.
5. Please do not uninstall the machine at will, and do not put hands into the chamber under the blackboard behind the machine in case to avoid the electric shock.
Others side for the machine explanatory memorandum.

关键词:

下载附件: